Description
Roller mop robot vacuum for wet and dry cleaning with an all-in-one station
The roller mop robot vacuum Roborock Qrevo Curv 2 Flow vacuums with 20,000 Pa of suction and washes the floor with a roller mop turning at 220 rpm. The station empties the robot’s dust bin, washes the roller mop with 75 °C water, dries it with 55 °C warm air and refills the robot’s water tank.
LiDAR navigation maps your home
LiDAR navigation is a robot vacuum mapping method in which a laser sensor measures the distance to walls and furniture from reflected light pulses, and the robot builds a map of the rooms from these measurements. Following the map, the Qrevo Curv 2 Flow cleans room by room: in each room it first runs along the edges and then covers the floor in a zigzag pattern. According to the manufacturer, the Reactive AI obstacle recognition sensor recognises more than 200 types of objects.
Roller mop on carpets and along walls
When the robot drives onto a carpet, the roller mop cover slides out automatically in front of the mop and the carpet stays dry. The FlexiArm feature, enabled in the app, extends the mop along walls and certain obstacles. For hair and pet fur, the brushes have a dual anti-tangle system.
Installation and use with the app
The station needs a hard, flat floor against a wall and free space of at least 1.2 m in depth, 0.46 m in width and 0.9 m in height. Fill the clean water tank with cold tap water. In the Roborock app you can set the mop washing frequency and mode, the drying duration and the Do Not Disturb period, which is 22:00–08:00 by default. The robot connects to 2.4 GHz Wi-Fi and supports voice commands through Amazon Alexa. The lithium-ion battery has a capacity of 5200 mAh and a runtime of up to 240 minutes; if it runs low during cleaning, the robot recharges in the station and resumes where it left off.
Cleaning and maintenance
The roller mop comes out with a release button; clean it as needed and replace it every 1–3 months. Clean the main brushes and the washable filter every two weeks and replace them every 6–12 months; let the filter dry for at least 24 hours before refitting. Clean the side brushes monthly and replace them every 3–6 months. The station’s dust bag handle seals the bag on removal.
In the box
- Robot vacuum Roborock Qrevo Curv 2 Flow, 1 pc
- Station Roborock EWFD53HRR, 1 pc
- Power cord
- Disposable dust bag





Reviews
There are no reviews yet.