Description
Hose timer for watering two zones separately from one garden tap
The RainPoint ITV205 hose timer is a two-zone timer with an LCD screen and buttons that fits on a garden tap and waters lawn and beds on different schedules. The screen shows the time and the start of the next watering.

Setting up automatic watering for each zone
Each zone gets its own start time, a duration from 1 minute to 3 hours 59 minutes and a frequency of every 1–12 hours or every 1–7 days. The dial selects the setting step, the ZONE button switches between zones 1 and 2, and the clock can show 12-hour or 24-hour format. When both zones water at the same time, the water pressure is shared between the two outlets.

Rain delay and manual watering
The DELAY button postpones watering by 24, 48 or 72 hours when rain is expected. The OK/MANUAL button starts an extra watering at any time and the programmed schedule is kept.


Installation
The battery compartment on the back takes two new 1.5 V AAA alkaline batteries; then press the cover firmly shut. Turn off the garden tap, wrap sealing tape around the tap thread and screw the timer onto the tap by hand, with the screen as upright as possible. Then wrap tape around the outlet threads, screw on the 3/4″ garden hoses and turn the tap on after programming. The timer fits a tap with a BSP 3/4″ or 1″ thread and works at a water pressure of 0.5–8 bar and a flow of up to 35 l/min. Before first use, activate the valves in manual watering mode.


Cleaning and care
The inlet filter traps dirt particles, so clean it regularly and replace a worn filter. The timer is rated IP54, protected against dust and splashing water from any direction, and works at 3–50 °C. Before frost, remove the timer from the tap and store it indoors.
In the box
- RainPoint ITV205 hose timer, 1 pc
- Sealing tape
- Spare washer, 2 pcs
- Mounting nut
- Quick start guide
- User manual


Reviews
There are no reviews yet.