Description
Wi-Fi hose timer for watering four garden areas separately
The smart Wi-Fi hose timer RainPoint HTV405FRF fits on a garden tap and controls four zones with separate valves. You set the plans in the RainPoint Home app; the timer connects to the app through the RainPoint HWG023WBRF Wi-Fi gateway, which is available separately.

Three watering modes and a schedule for each zone
For each zone you can set up to six watering plans in three modes: normal irrigation, interval irrigation, and cycle and soak. In interval mode the run and pause times range from 1 second to 60 minutes, in cycle and soak from 1 minute to 12 hours. Watering frequency can be every day, odd or even dates, a set interval of days or a custom calendar. Seasonal adjustment changes the watering time within 10–200%.

Manual watering and rain delay
A zone can be started manually from the app for 1 minute to 12 hours or with the zone button on the timer. When it rains, rain delay pauses watering for 24, 48 or 72 hours, after which the timer continues with the next plan. A smart scene links watering to the local weather forecast, the time or a device status, for example postponing the plans of all zones when heavy rain is forecast.

Alerts, soil moisture sensor and voice control
The app sends an alert when the batteries are running low, there is no water or a valve leaks. Each zone valve can be paired with one RainPoint Wi-Fi soil moisture sensor: when moisture exceeds the set value, the plans stop and resume when it drops below it. You can share management with family members and control the valves with English commands through Google Assistant or Amazon Alexa.


IP65 housing and brass inlet
IP65 means the housing is dust-tight and protected against water jets. The inlet has a 360° brass connector and a mesh filter that catches debris. The timer works at a water pressure of 0.5–8 bar, a flow rate of 5–35 l/min and temperatures of 3–50 °C.

Fitting to the tap and connecting to the gateway
Attach the inlet to the garden tap hand-tight and connect a garden hose or drip irrigation system to the outlets. The timer talks to the gateway over 433 MHz radio at up to 150 m in line of sight; the best position for the signal is on a tap 1.2–2.4 m above the ground. The timer can be supported against a wall with the included bracket and brace. Before first use, insert four AA batteries and test each valve by pressing its zone button.
Care and winter storage
Clean debris from the inlet filter regularly. Before freezing weather, remove the timer from the tap, open the valves with the zone buttons to drain the water, take out the batteries and keep the timer indoors in a warm, dry place.
In the box
- Wi-Fi hose timer RainPoint HTV405FRF, 1 pc
- Bracket, 1 pc
- Brace, 1 pc
- Nut, 1 pc
- Thin washer, 2 pcs
- Thick washer, 1 pc
- Small screw, 2 pcs
- Medium screw, 1 pc
- Large screw, 1 pc
- Sealing tape
- Spare rubber gasket
- User manual


Reviews
There are no reviews yet.