Description
SUNLU PLA+ is a green PLA filament for FDM printers whose printed parts reach an Izod impact strength of 8.5 kJ/m².

PLA filament on a neatly wound spool
SUNLU’s patented technology winds the filament onto the spool in orderly layers, which reduces the risk of knots and tangles during long prints. The diameter tolerance is ±0.02 mm, so the filament reaches the nozzle at an even thickness.

Strength and heat resistance
The printed material has a tensile strength of 65 MPa, a flexural strength of 75 MPa and an elongation at break of 12%. Low shrinkage and good layer adhesion keep the part’s dimensions accurate, and under a load of 0.45 MPa it keeps its shape up to 52 °C.

Print settings and compatible printers
The filament has a nozzle temperature of 210–235 °C and a print speed of up to 300 mm/s. It suits FDM printers that use 1.75 mm filament, such as machines from Bambu Lab, Creality, Prusa and Anycubic. Keep the spool in its sealed original packaging in a cool, dry place, away from sunlight and heat sources.







Reviews
There are no reviews yet.