Description
Wood-filled PLA filament for decorative items
Wood-filled PLA filament in a maple tone (Maple) gives printed objects a wood texture. The filament is intended for printing decorative items, figurines, accessories, toys and lighting fixtures. It suits FDM printers, including Bambu Lab, Creality, Prusa and Anycubic models.



Print settings
The recommended nozzle temperature is 200–220 °C, print speed up to 230 mm/s and bed temperature 50–60 °C. A textured PEI plate works without any surface treatment, and the cooling fan stays on while printing. Retraction is 0.8–1.2 mm at 30–40 mm/s. PVA can be used as support material.

Material properties
A printed test specimen has a tensile strength of 33 ± 6 MPa, a bending strength of 55 ± 5 MPa and an elongation at break of 10 ± 5%. The heat deflection temperature is 55 ± 3 °C and the Vicat softening temperature 54 °C. Shrinkage is 0.1–0.3%, density 1.17 g/cm³ and the melting temperature 164 °C. Neatly wound filament reduces tangling and nozzle clogging.
Drying and storage
Dry filament that has absorbed moisture at 50 °C. Keep the filament out of direct sunlight, as UV radiation can turn it yellow.






Reviews
There are no reviews yet.