Description
Dining chair with an oval upholstered backrest
The oval backrest of the dining chair curves slightly around the back and the seat has a thick rounded edge. The backrest rests on the two rear legs, and behind it there is a curved panel in the same wood tone as the legs. The four round, downward-tapering legs are connected under the seat with cross supports, and the chair has no armrests. The chair is intended for a dining table in the kitchen, dining room or the dining area of an open-plan living room.
Material and finish
The steel legs have a finish resembling natural wood. The upholstery is made of polyurethane foam, the construction also includes plywood, and the cover fabric is 100% polyester. The mottled sand-coloured fabric is woven from beige and brown threads. The abrasion resistance of the cover fabric is 25,000 Martindale cycles: that is how many rub cycles the fabric withstood in the test.
Dimensions
The chair is 52 cm wide, 58 cm deep and 77 cm high. The seat height is 47 cm and the seat depth is also 47 cm. The chair has been tested for home use and its load capacity is 110 kg. The chair weighs 7.6 kg.
Use and suitability
The chair can also be used at a desk.
Assembly and care
The chair is delivered in two parts: the frame with the backrest and legs is ready, and the seat is attached to it with four M6 × 65 mm bolts, an Allen key is included. Assemble the chair on a soft surface, for example a rug, to avoid scratches, and tighten the bolts again two weeks after assembly and then every three months. Wipe the fabric with a damp cloth and use only clean water, remove dust and dirt with a vacuum cleaner or a clean soft cloth. Do not use detergents, solvents or other chemicals on the fabric, as they may change the colour of the fabric.









Reviews
There are no reviews yet.