Description
Rotating tablet holder with a lockable steel casing
The floor-mounted tablet holder Neomounts FL15-650WH1 keeps the tablet in a casing that locks with the supplied key. The casing tilts 0–75° and rotates between portrait and landscape.
Key features
- Six interchangeable inlay panels fit the casing to a 9.7–11-inch tablet.
- The panels fit iPad (5th–10th gen), iPad Air (1st–4th gen), iPad Pro 9.7″, 10.5″ and 11″ (1st–5th gen), Samsung Galaxy Tab A 10.1″, Galaxy Tab A7 10.4″ and Galaxy Tab S6 Lite 10.4″.
- Anti-slip pads protect the tablet from scratches.
- The charging cable runs inside the pole.
Installation
Assembly needs a screwdriver and a drill. Stick the pads under the base, route the cable through the pole and fix the pole to the base plate with the M8 screws. In a wooden floor drill Ø 4.5 mm holes 55 mm deep; in a concrete or stone floor drill Ø 10 mm holes 60 mm deep for the plugs. Then fix the casing to the pole, unlock it with the key, remove the foam parts, choose the panel for your tablet and set the two clamps before fully tightening the screws.
In the box
- Tablet holder Neomounts FL15-650WH1, 1 pc
- inlay panels, 6 pcs
- pole and base plate
- adhesive pads, 4 pcs
- screws M4 × 12, M5 × 6 and M8 × 20, 4 pcs each
- floor screws and plugs, 2 pcs each
- lock key
- hex keys 4 mm and 5 mm



Reviews
There are no reviews yet.