Description
Wall tablet holder with a lockable, rotating frame
This lockable wall tablet holder grips the tablet with height- and width-adjustable clamps with a range of 129–181 × 200–246 mm (width × height). The rotating frame sets the screen in portrait or landscape on the wall, and the top of the frame has an opening for the tablet camera. Anti-slip pads hold the tablet and protect it from scratches. The steel holder measures 18.1 × 3.7 × 24.6 cm and holds the tablet 2.5 cm from the wall.
Installation on a wall or VESA mount
Installation needs a drill and a screwdriver, and the wall plate is fixed with a single screw: a Ø 4.5 mm hole 55 mm deep in a wooden stud, or a Ø 10 mm hole 60 mm deep for the wall plug in brick or concrete. The holder is screwed to the wall plate or, with the M5 × 25 screws and nuts, to a VESA 100 × 100 mount; VESA is a standard mounting hole pattern, here a 100 mm square. Pads matching the tablet thickness go on the back of the holder: 2 mm pads for 7.5–8.5 mm, 3 mm pads for 6.5–7.5 mm and 4 mm pads for tablets under 6.5 mm. The tablet is placed between the clamps, the clamps are pressed tight against the edges and the holder is locked with the 4 mm hex key.
In the box
- Tablet holder (1)
- Wall plate (1)
- Pads 2 mm, 3 mm and 4 mm (4 of each)
- Screws M5 × 20 (4) and M5 × 25 (4)
- Nuts M5 (4)
- Screw ST6.3 × 55 and wall plug (1 each)
- Washers D6 (2)
- Hex key 4 mm (1)
- Spanner 8–10 mm (1)









Reviews
There are no reviews yet.