Description
Floor tablet holder that rotates and tilts
The floor-mounted tablet holder Neomounts FL15-625BL1 holds a 7.9–11-inch tablet weighing up to 1 kg and up to 8.5 mm thick. The holder rotates 360° to switch between portrait and landscape and tilts from +20° to −110°. A sliding rail at the back lets you centre the tablet in the holder. A cutout at the top keeps the tablet camera clear.
Lockable tablet floor stand protects the device from removal
The holder is locked with the included security screw, tightened with the supplied Ø4 mm key. The base plate is fixed to the floor with two screws. Anti-slip pads keep the tablet free of scratches, and clamps adjustable in width and height grip the device across 129–181 mm in width and 200–246 mm in height. The charging cable can be routed through the pole to the base plate.
Installation
Installation needs a screwdriver and a drill.
- Attach the lower pole to the base plate.
- Drill two Ø10 mm holes 60 mm deep in the floor, insert the plugs and fix the base with the screws and washers.
- Connect the upper pole to the lower pole and fix it with the M6 × 10 screw.
- Fix the tablet holder to the VESA plate with four M5 × 20 screws.
- Stick the pads to the holder according to tablet thickness: 2 mm pads for 7.5–8.5 mm, 3 mm pads for 6.5–7.5 mm and 4 mm pads for tablets under 6.5 mm.
- Place the tablet in the holder, press the clamps tight and lock the holder with the Ø4 mm key.
- Route the cables through the pole.
- Adjust the holder position with the 2.5 mm and 4 mm hex keys.
In the box
- Tablet holder Neomounts FL15-625BL1, 1 pc (holder, upper and lower pole, base plate and pole connector)
- Anti-slip pads 2 mm, 3 mm and 4 mm, 4 pcs each
- Screws M5 × 16 (3 pcs), M5 × 20 (4 pcs), M6 × 10 (1 pc) and ST6.3 × 55 (2 pcs)
- Wall plugs (2 pcs) and D6 washers (2 pcs)
- Hex keys 2.5 mm, 3 mm and 4 mm and a Ø4 mm locking key






Reviews
There are no reviews yet.