Description
AIO CPU liquid cooler with three fans and ARGB lighting
This white ARGB-lit liquid cooler carries heat from the processor to an aluminium radiator cooled by three fans. The case needs a 360 mm radiator mount: the radiator measures 402 × 120 × 27 mm and the tubes are 410 mm long.
Pump and fans
The three-phase motor of the fourth-generation pump runs at up to 3100 rpm, and the microchannel copper base is thick. Thermal paste comes pre-applied, and pump noise is 19 dB(A). The motherboard controls the hydro bearing fans through a 4-pin PWM connector between 500 and 2250 rpm; airflow is up to 85.85 CFM and noise at full load up to 32.9 dB(A). With the low-speed adapter (LSP) the speed is 500–1600 rpm, airflow up to 60.85 CFM and noise up to 28.2 dB(A).
ARGB lighting and mirror cap
The aluminium pump housing carries a narrow-framed mirror cap that reflects 16 LEDs as an infinity effect. ARGB (addressable) lighting lets each LED be controlled individually: it connects to the motherboard’s 3-pin 5 V ARGB header, and effects can be controlled with a compatible motherboard or controller.
Compatibility
The mounting brackets fit these CPU sockets:
- Intel: LGA 1700, LGA 1200, LGA 1151, LGA 1150 and LGA 1155
- AMD: AM5 and AM4
In the box
- pump and radiator with tubes
- 3 × 120 mm ARGB PWM fan
- low-speed adapter (LSP)
- Intel backplate and white Intel and AMD mounting brackets
- mounting screws, standoffs and nuts
- fan and lighting cables







Reviews
There are no reviews yet.