Description
AIO CPU liquid cooler with two fans and an ARGB pump
This AIO CPU liquid cooler with an ARGB pump carries heat from the processor to an aluminium radiator cooled by two fans. The case needs a 240 mm radiator mount: the radiator measures 282 × 120 × 27 mm and the tubes are 410 mm long.
Pump and fans
The three-phase motor of the fourth-generation pump runs at up to 3100 rpm, and the microchannel copper base is thick. Pump noise is 19 dB(A). The motherboard controls the FK120 fans through a 4-pin PWM connector between 500 and 2250 rpm; airflow is up to 85.85 CFM, static pressure 3.27 mmAq and, at full load, noise up to 32.9 dB(A). The fans use fluid dynamic bearings.
ARGB lighting and three-dimensional mirror cap
Under the pump cap sits a three-dimensional infinity mirror whose facets reflect the light in a geometric pattern. ARGB (addressable) lighting lets each LED be controlled individually: it connects to the motherboard’s 3-pin 5 V ARGB header, and effects can be synchronised with supported software. The black mounting brackets stay out of sight once installed.
Compatibility
The mounting brackets fit these CPU sockets:
- Intel: LGA 2066, LGA 2011-v3, LGA 2011, LGA 1700, LGA 1200, LGA 1151, LGA 1150 and LGA 1155
- AMD: sTRX4, sTR4, AM5 and AM4
In the box
- pump and radiator with tubes
- 2 × FK120 PWM fan
- Intel backplate and Intel and AMD mounting brackets
- mounting screws, standoffs and nuts
- connection cable






Reviews
There are no reviews yet.