Description
AIO CPU liquid cooler with a large IPS screen on the pump
The SPARTACUS 360 is an AIO CPU liquid cooler for motherboards with Intel LGA 1851 and LGA 1700 and AMD AM5 and AM4 sockets. The radiator measures 402 × 120 × 27 mm and the tubes are 410 mm long, worth comparing with the case’s radiator mount before choosing. According to the maker, the pump dissipates up to 320 W of heat.
LCD screen with modular blocks
The screen has a brightness of 750 nits, a 30 Hz refresh rate and displays 16.7 million colours. In Monitoring mode the main block shows CPU temperature, usage, frequency or pump speed, while the side blocks show items such as GPU power, network speed or RAM usage. Graph mode shows CPU and GPU usage, frequency and network traffic every second; Media mode shows images, GIFs, MP4 videos or a music spectrum. Zen Mode reduces screen updates under heavy load so the application puts less load on the system.
DeepCreative controls fans and pump by load
The DeepCreative AI algorithm tracks CPU load and sets the fan and pump speeds to match, without BIOS tuning. You can choose between Silence AI, Performance AI, Sleep, Office, Gaming and Overclocking modes. When the CPU temperature rises above 80 °C, the fans go straight to full speed and return to the selected mode once it drops below 80 °C.
Sixth-generation pump and fans
The pump’s three-phase, 6-slot, 4-pole FOC-controlled motor runs between 2500 and 3400 rpm under PWM control, and the enlarged copper base has fine microfins. The fans run at 500–2500 rpm and stop below a 5% PWM duty cycle. At full speed each fan delivers 79.89 CFM of airflow and 3.30 mmAq of static pressure at up to 32.23 dB(A). Against leaks, DeepCool’s patented Anti-Leak valve releases pressure when the internal pressure exceeds atmospheric pressure.
Single-cable connection and mounting
Power and signal for the pump and screen run through a single 10-pin connector. The hub lets you adjust fan speed and ARGB lighting separately per channel and can be fixed in the case with magnets or screws. The magnetic pump cap comes off easily and connects through pogo pin contacts. The offset bracket aligns the cold plate with the hotspot of LGA 1851 CPUs such as the Intel Core Ultra 9 285K and Core Ultra 7 265K, lowering the temperature by 1–3 °C according to the maker. Rear-lock mounting lets you fit the cooler from the front without screws.
In the box
- Pump block with radiator and tubes
- Three 120 mm PWM fans
- Hub for fan and ARGB lighting control
- Offset mounting bracket for LGA 1851 CPUs
- Mounting hardware for other Intel and AMD sockets




Reviews
There are no reviews yet.