Description
Rack-mount UPS for server and network equipment
The rack-mount 2U UPS EVER ECO Pro 700 AVR CDS supplies battery power to connected equipment during a power cut and evens out mains voltage with automatic voltage regulation (AVR). The permitted input voltage range is 168–264 V and power comes from one sealed 12 V lead-acid battery.
Outputs and connections
Each output can carry up to 10 A, and the rear panel also has an automatic circuit breaker. Through the USB port the UPS connects to a computer, and the Powersoft software can switch the battery-mode beeper on or off.
Indicator and audible signals
The front indicator is green in mains mode and orange on battery, and flashes green while charging. On battery an intermittent beep sounds, getting faster as the battery discharges and finally becoming continuous. Overload is signalled by a continuous tone, and an output short circuit by a fast intermittent beep with a red indicator.
Installation and first start
Slide the UPS into the server rack and fasten it from the front with screws, leaving at least 1U of free space above and below it. For the first start, plug the switched-off UPS into a 230 V socket, switch it on and let the battery charge for 4 hours. Then switch the UPS off, connect the computer and monitor to its outputs and switch on the UPS, the monitor and the computer. Finally, download the software from the manufacturer’s website www.ever.eu and connect the UPS to the computer with the USB cable.
In the box
- UPS EVER ECO Pro 700 AVR CDS
- USB cable
- Quick start guide











Reviews
There are no reviews yet.