Description
CyberPower line-interactive UPS and battery
The UPS with AVR function CyberPower CP1350EPFCLCD works with an input voltage of 165–265 V and delivers 230 V output. During a power cut, battery power lasts 10 minutes at half load and 4 minutes at full load. The battery voltage is 12 V and its capacity is 8.5 Ah, the charging time is 8 hours.
Surge protection for data lines
Surge protection also covers the network, DSL, modem, telephone and fax line. For this, the rear panel has a pair of RJ-45 sockets, NETWORK IN and OUT, through which the line is routed. Before the output sockets, the mains power passes through an EMI/RFI noise filter.
Display, buttons and interfaces
The front has an LCD display, the DISPLAY, MUTE and ENTER/SETUP buttons, and a USB-A and USB-C socket. The rear has a USB-B socket, a serial port (SERIAL), an SNMP card expansion slot, a RESET button and an IEC C14 power input. An audible signal indicates battery power, a low battery, overload and a fault. When mains power returns, the UPS restarts itself.
Cooling, dimensions and weight
The UPS with passive cooling has no fan and its noise level is 35 dB. The tower casing is 10 cm wide, 37 cm deep and 26.5 cm high, and it weighs 10.9 kg.










Reviews
There are no reviews yet.