Description
Robot vacuum with an all-in-one station that washes and dries the mops
The Dreame L50 Ultra AE robot vacuum vacuums with 28,000 Pa suction and mops in the same pass with two mops. After cleaning, the station empties the robot’s 0.25 l dust bin into a dust bag and washes and dries the mop pads.
With LiDAR navigation the robot follows a saved map
LiDAR navigation is a robot vacuum mapping method in which a laser sensor measures the distance to walls and furniture from the return time of a light pulse and the robot builds a map of the rooms from these readings. The L50 Ultra AE runs a fast mapping pass without cleaning the first time and saves the map. A front 3D line laser sensor helps the robot spot objects in its path. A camera robot reads a room by image features; a LiDAR model suits buyers who value an accurate laser map.
Four cleaning modes and edge cleaning
In the app you can choose vacuuming and mopping together, mopping after vacuuming, vacuum only or mop only. For edges the robot has a MopExtend mop assembly and an extending side brush, and it recognises carpet with a carpet sensor. Spot cleaning covers a 1.5 × 1.5 m area around the robot.
The station refills, washes and doses
The robot’s water tank is refilled during cleaning from the station’s 4.5 l clean water tank, and used water is collected in a 4 l tank. The mops are washed on a heated washboard, and the dispenser module adds cleaning solution to the water automatically.
Battery, charging and app
The 5200 mAh battery gives up to 180 minutes of runtime and charges from empty in about 3.5 hours. If the battery runs low during cleaning, the robot recharges at the station and resumes the unfinished clean. In the Dreamehome app you can set the mop washing frequency, a do-not-disturb period and child lock, and the robot takes voice commands through Amazon Alexa and Google Assistant.
Getting started
Place the station in an open spot with good Wi-Fi coverage, leaving more than 5 cm at the sides and more than 1 m in front. Then fit the ramp extension plate and the mop assembly, connect the robot to a 2.4 GHz Wi-Fi network and fill the clean water tank and the dispenser module.
Cleaning and maintenance
Empty and rinse the used water tank after every clean, and clean the clean water tank every two weeks. Rinse the dust bin and filter with clean water only and refit them fully dry. The manufacturer recommends replacing the mop pads every 1–3 months, the dust bag every 2–4 months and the main brush every 6–12 months.
In the box
- Robot vacuum Dreame L50 Ultra AE, 1 pc
- Station RCLE0563
- Mop assembly with mop pads
- Ramp extension plate
- Power cord







Reviews
There are no reviews yet.