Description
Robot vacuum whose station washes and dries the roller mop
The Dreame Aqua10 Ultra Roller roller mop robot vacuum vacuums with 30,000 Pa of suction and mops with a roller that is rinsed continuously with fresh water while it works. The station empties the robot’s dust bin, washes the roller mop with 100 °C water, dries it with warm air and refills the robot’s water tank.
The robot maps the home with a retractable LiDAR sensor
LiDAR navigation is a mapping method in which a laser sensor on the robot works out from the reflected light pulse how far away walls and furniture are, and draws a plan of the home from these distances. The Aqua10 Ultra Roller’s OmniSight 2.0 LDS sensor (laser distance sensor) retracts and recognises more than 240 object types, which the robot steers around. A camera robot relies on image features, while a LiDAR robot suits a home where you want an accurate map and orderly cleaning lines. In dim light an LED light gives extra light for obstacle detection.
Dry carpets and thresholds it climbs
When it drives onto a carpet, AutoSeal closes and raises the mop by 14 mm so the carpet stays dry. FluffRoll is a counter-rotating brush that lifts carpet fibres for a deeper clean. Retractable ProLeap feet help the robot climb obstacles up to 8 cm high.
Emptying, mop washing and solution dosing in the station
The robot empties its 0.22-litre dust bin into the station’s dust bag, and the station empties dust on its own for up to 100 days. The station’s 4-litre clean water tank refills the robot’s 0.1-litre water tank, and used water is collected in the 3.5-litre dirty water tank. From two chambers the station automatically adds cleaning solution and pet odour remover during operation.
Installation and use in the Dreamehome app
The station goes in an open spot with good Wi-Fi coverage, with more than 5 cm free at the sides and more than 1 m in front, and before the first clean you fit the ramp extension plate, remove the robot’s protective pieces, add the solutions to the chambers and fill the clean water tank with fresh water. The robot connects to the Dreamehome app by QR code on a 2.4 GHz Wi-Fi network, and in the app you can choose the cleaning mode: vacuuming with wet cleaning, vacuuming only or wet cleaning only. With the voice command “OK Dreame” you can start cleaning hands-free. A full charge takes about 4.5 hours, and when the battery runs low the robot returns to the station and resumes the unfinished clean after charging.
Cleaning and care
Empty and rinse the dirty water tank after every use and clean the clean water tank every two weeks. The maker recommends replacing the dust bag every 2–4 months, the mop assembly every 1–3 months, the dust bin filter every 3–6 months and the main brushes every 6–12 months. Rinse the dust bin and filter with clean water only and refit them only when fully dry. Descale the heating module with a small amount of 5% vinegar.
In the box
- Robot vacuum Dreame Aqua10 Ultra Roller, 1 pc
- All-in-one station RCHE0401
- Power cable
- Ramp extension plate
- Two-chamber solution dispenser module








Reviews
There are no reviews yet.