Description
Robot vacuum with OZMO ROLLER 3.0 roller mop
The roller mop robot vacuum washes the roller with pressurised water while it works. TruEdge 3.0 takes the roller out to the walls for edge cleaning, and ZeroTangle 4.0 uses the airflow to guide hair off the brush into the dust bin. On carpets the robot lifts the mop by 15 mm; carpets with pile over 10 mm should be rolled up or fenced off with a virtual boundary in the app.
OMNI all-in-one station
The station empties the robot’s 0.25 l dust bin into the dust bag and washes the roller mop with hot water. It refills the robot’s 0.11 l water tank automatically from its 4-litre clean water tank, and used water goes into the 2.2-litre dirty water tank. The station adds cleaning solution from its solution box automatically; this function can be switched off.
Navigation, battery and voice control
The laser navigation module maps rooms up to 10 m away, and maps can be saved for several floors. The robot detects obstacles with AIVI 3D 4.0 structured light, an RGB AI camera and an auxiliary light. It takes voice commands from up to 5 m away and connects to the ECOVACS HOME app via Bluetooth and 2.4 GHz Wi-Fi. The robot is 9.5 cm tall, crosses single steps up to 2.4 cm and stepped thresholds up to 4 cm; the 4000 mAh battery charges in about 2.5 hours.
Installation and first use
Place the station on a flat, hard surface against a wall, leaving 0.05 m free at the sides and 0.8 m in front, out of direct sunlight. Cover the lowest 14 cm of any reflective surfaces near the station. Never fill the clean water tank with hot water. For the first use the manufacturer recommends vacuuming the floor 2–3 times before wet cleaning.
Cleaning and maintenance
Clean the drip tray, main brush and filter every week and the side brush every 2 weeks. Rinse the dust bin and filter with water and let them air-dry; never wash the robot itself with water. Clean the station’s dirty water tank, body and solution unit monthly, the clean water tank every 3 months and the mop washing tray every 5 months. Replace the roller mop every 1–2 months, the side brush and filter every 3–6 months and the main brush every 6–12 months.
In the box
- DEEBOT T90 PRO OMNI robot
- OMNI all-in-one station
- station base
- power cord
- ECOVACS DEEBOT cleaning solution
- user manual






Reviews
There are no reviews yet.