Description
Robot vacuum with an all-in-one station that vacuums and mops floors
Xiaomi 5 vacuums floors with 20,000 Pa suction and mops them with two rotating mop pads. You replace the station’s dust bag roughly every 2.5 months. The mop pads dry in the station with warm air in about 2 hours. During cleaning the robot returns to the station to wash its mop pads and takes water from the station’s 4-litre clean water tank.
Laser radar, carpet sensor and edge cleaning
Rooms are mapped by a dToF laser radar that lowers automatically under low furniture, so the robot reaches areas with more than 9.5 cm of clearance. The S-Cross structured-light sensor detects low obstacles. An ultrasonic sensor detects carpets and the robot lifts its mop pads by 15 mm to keep them dry. Along walls and in corners the robot extends its side brush and mop. The anti-tangle main brush has two concealed blades that cut hair as it cleans.
Control with the Xiaomi Home app
In the app you choose the cleaning mode, suction level and water flow, mark no-go zones and virtual walls, set a schedule and decide how often the station empties the dust bin and the robot washes its mop pads. Voice control works through Amazon Alexa or Google Assistant. The battery charges fully in about 6 hours. If the battery runs low during cleaning, the robot recharges at the station and resumes where it stopped.
Installation
Place the station against a wall on a level hard floor with at least 0.82 m free above, 1.47 m in front and 0.44 m at the sides. Attach the washboard extension to the front of the station, connect the power cord and fill the clean water tank with clean water up to the MAX mark. Switch the robot on by holding the power button for 3 seconds and place it on the station’s charging contacts. The robot connects to the app over 2.4 GHz Wi-Fi and creates a quick map without cleaning on its first run.
Cleaning and maintenance
Empty and rinse the dirty water tank after every use, the clean water tank every 2 weeks, and clean the washboard every 1–2 weeks. Clean the main brush, side brush and filter every 2 weeks; rinse the dust bin and filter with clean water only and dry them before refitting. Wipe the sensors and charging contacts monthly with a soft dry cloth. Replace the main and side brushes every 3–6 months, the filter and mop pads every 6–12 months.
In the box
- robot vacuum with dust bin, filter, side brush and anti-tangle main brush
- all-in-one station with disposable dust bag, clean and dirty water tanks and washboard
- 2 mop holders with fitted mop pads
- washboard extension
- power cord
- user manual and quick start guide








Reviews
There are no reviews yet.