Description
Robot vacuum with rotating mops
The robot vacuum with all-in-one station Ecovacs DEEBOT T50 OMNI Gen3 mops with the two rotating mop plates of the OZMO Turbo 2.0 system. With TruEdge 2.0, an extending mop plate takes the mop to within 1 mm of the wall and the side brush reaches into corners. The ZeroTangle 3.0 brush system, with V-shaped bristles, a spiral brush and comb teeth, keeps hair from wrapping round the brush.
Carpets and mop lifting
An ultrasonic carpet sensor detects the position and size of a carpet, and the robot then lifts the mops by up to 9 mm. The app has 4 carpet modes: pass through only, vacuum only, clean as on floor and no-go area. The robot cleans carpets with a pile of up to 10 mm.
Navigation and obstacle detection
The built-in dToF LiDAR measures distances with a laser within a 10 m radius and builds a map of the rooms. TrueDetect 3D structured infrared light detects obstacles from 0.4 m, so the robot can clean close along their edges. According to the manufacturer, TrueMapping 2.0 maps 100 m² in 8 minutes, and the ECOVACS HOME app stores maps of several floors.
OMNI station
The station empties the robot’s dust box into its built-in dust bag, washes the mops with 75 °C water and dries them with 45 °C warm air. It also cleans its own mop-washing tray, refills the robot’s water tank and adds cleaning solution. The battery charges in about 4 hours, and charging can be scheduled outside peak electricity hours.
Setup
Remove the protective materials and fit the side brush and the station ramp until they click. Place the station on a flat, hard surface against a wall, out of direct sunlight. Fill the clean water tank, put the cleaning solution box into the station and switch on the power switch under the robot’s top cover. Setup is done in the ECOVACS HOME app, and the robot connects to a 2.4 GHz or mixed 2.4/5 GHz network.
Cleaning and care
Clean the main brush and filter once a week and the side brush every 2 weeks. Rinse the filter with clean water, do not brush or scrub it, and let it dry completely before refitting. Replace the mop pads every 1–2 months, the filter and side brush every 3–6 months and the main brush every 6–12 months. The app tells you when to change the dust bag.
In the box
- DEEBOT T50 OMNI Gen3 robot vacuum
- OMNI station with built-in dust bag
- Station ramp
- Side brush
- Power cord
- User manual








Reviews
There are no reviews yet.