Description
Network cabinet with lockable glass door and side panels
This wall-mounted 19″ network cabinet from Digitus is 12U high, 600 mm wide and 600 mm deep. U is the height unit of 19″ equipment, and 1U equals 44.45 mm. The cabinet’s external height is 643 mm.
Rails and cable entry
Inside are two pairs of galvanised 19″ profile rails that can be moved in depth, giving an equipment mounting depth of 320–450 mm. The rails carry U markings that read in both directions. Cables enter through a sliding roof entry with a foam rubber seal and through pre-cut entries with plastic covers in the rear wall and the base plate.
Doors and side panels
The front door is made of safety glass in a steel frame, opens to 210° and has single-point locking. The front door and the panels on both sides lock and can be removed, and the front door hinges can be switched to the other side.
Ventilation, material and earthing
The roof has a pre-cut opening for a fan module, and the ventilation slots serve active and passive ventilation. The housing is made of sheet steel up to 1.5 mm thick with a light grey (RAL 7035) electrostatic powder coating. Several earthing points are provided for the installed equipment.
Wall mounting
To mount the cabinet, first screw the housing frame plate to the wall, then connect the housing to the frame plate. Screws, cage nuts and washers are supplied for fitting equipment.
In the box
- earthing wire set
- installation set: screws, cage nuts and washers
- key, 2 pcs







Reviews
There are no reviews yet.