Description
Rack-mount router with 10G SFP+ ports
The router for high-throughput networks uses an Amazon Annapurna Labs Alpine AL73400 processor and supports Layer 3 Hardware Offloading. In the manufacturer’s test, routing with 1518-byte packets reached 39,009 Mbit/s, or 3212.2 thousand packets per second.
Ports and switch chip
The four SFP+ ports and 12 Ethernet ports are connected to a Marvell 98DX3255 switch chip, and each group of four ports has its own full-duplex link to the chip. A separate gigabit port connected directly to the processor is intended for management. The router also has an RJ45 serial port and an M.2 PCIe slot for an SSD of up to 8 TB.
Power and cooling
Each AC input works at 100–240 V. Maximum power consumption is 72 W, or 60 W without attachments. The housing is cooled by 4 fans driven by a fan controller.
Mounting and first setup
The included brackets fix the router in a server rack. For the first setup, connect your computer to the MGMT/BOOT port or the first Ethernet port, connect the router to the mains and set the computer’s network card IP address to 192.168.88.2/24. Then open 192.168.88.1 in a browser or use the WinBox tool, log in as admin with no password and set a router password. To comply with local regulations, upgrade RouterOS to version 7.10.1 or later.
In the box
- Router MikroTik CCR2116-12G-4S+
- 2 power cords
- White rack-mount bracket
- Fastening set






Reviews
There are no reviews yet.