Description
Silk dual-colour PLA filament for FDM printers
Dual-colour silk PLA+ gives a model a silky, glossy surface on which black and green alternate with the viewing angle. The filament is intended for printing decorative items, figurines, accessories, toys and lighting fixtures. It suits FDM printers, including Bambu Lab, Creality, Prusa and Anycubic models.



Print settings
The recommended nozzle temperature is 210–230 °C at a print speed of 50–200 mm/s, with the bed at 50–60 °C. A textured PEI plate works without any surface treatment, and the cooling fan stays on while printing. Retraction is 0.8–1.2 mm at 30–40 mm/s. PVA can be used as support material.

Material properties
A printed test specimen has a tensile strength of 50 ± 4 MPa, a bending strength of 78 ± 5 MPa and an elongation at break of 11 ± 3%. The heat deflection temperature is 57 ± 3 °C and the Vicat softening temperature 54 °C. Shrinkage is 0.1–0.3%, density 1.23 g/cm³ and the melting temperature 164 °C.
Drying and storage
Dry filament that has absorbed moisture at 50 °C. Keep the filament out of direct sunlight, as UV radiation can turn it yellow.






Reviews
There are no reviews yet.