Description
Laptop charging trolley with lockable doors
The charging trolley has 30 slots on three shelves, 10 per shelf, on castor wheels. The shelf depth is 415 mm. The front and back doors are double-folding and open 180°; both have a lockable pressure lock with a swivel handle and 2-point locking.
Charging from USB-A ports and AC outlets
Each slot’s USB-A port delivers 10 W (5 V, 2.1 A), with up to 300 W across all USB ports. At the back are 3 socket strips, each with 10 safety sockets, for the devices’ own chargers. Cable feedthroughs and storage for excess cable on every shelf keep chargers and cables in place.
Cooling and electrical protection
Three 24 V fans start automatically when the temperature inside exceeds 40 °C and move warm air out through the ventilation slots. The power circuit has a 30 mA residual current device. On the side are a C20 power inlet and a switched socket.
Moving and using the charging cabinet
The trolley is delivered fully assembled and stands on four castors, two of them lockable; the castors can be removed if needed. Fit the handles to the outside of the trolley with the supplied mounting hardware. Connect the 2 m power cable to the C20 inlet on the side and directly to an earthed wall socket protected by a residual current device, without extension cables or multi-socket adapters. Then place the devices in the slots and connect them to a USB-A port or, with their own charger, to a rear outlet.
In the box
- Digitus DN-45002 laptop charging trolley
- 2 handles with mounting hardware
- power cable, 2 m
- 4 keys
- user manual








Reviews
There are no reviews yet.