Description
Temperature and humidity sensor with a three-year battery life
The Shelly BLU H&T ZB temperature and humidity sensor measures air temperature and relative humidity and transmits the data via Zigbee or Bluetooth. It works with Shelly systems as well as other smart home systems with a Zigbee coordinator.

Readings for automations and notifications
In Bluetooth mode the sensor sends a BTHome data packet every minute and immediately when the button is pressed; each packet holds temperature, relative humidity and battery level. In a Zigbee network it reports after a change in readings and at least once every 5 minutes without a change. Based on the readings your smart home can switch on heating or ventilation and send a notification when temperature or humidity crosses a set threshold.

Compatible with Shelly and BTHome platforms
Setting it up in the Shelly Smart Control app needs at least one permanently powered Shelly Gen2 or newer Wi-Fi and Bluetooth device that relays the sensor’s data. Compatible devices are the Shelly Plus, Gen3, Gen4 and Pro series. The app is optional: the sensor also works with other home automation platforms that support the BTHome protocol.

IP54-rated housing
The housing measures 37 × 37 × 10 mm and weighs 13 g. The IP54 rating means protection against dust and splashing water; the operating temperature is −20 °C to 60 °C and the ambient humidity 0–100%. Range is up to 10 m indoors and up to 30 m outdoors.

Installation and use
The sensor ships with the battery fitted, ready to use. On a horizontal surface place it with the sensor opening facing up; on a vertical or sloped surface fix it with the supplied double-sided foam sticker. Keep air flowing freely around the sensor opening. Bluetooth pairing mode starts with four button presses or a 10-second press, Zigbee pairing mode with five presses within 3 minutes of inserting the battery.

Replacing the battery
Open the back cover with a plastic opening tool or a bank card, remove the exhausted battery and insert a new CR2032 battery with the + mark on the correct side. Press the cover back onto the housing until it clicks into place.
In the box
- Temperature and humidity sensor Shelly BLU H&T ZB, 1 pc
- CR2032 battery, fitted
- Double-sided foam sticker
- User and safety guide

Reviews
There are no reviews yet.