Description
Temperature and humidity sensor for monitoring the indoor climate
The Shelly BLU H&T Display ZB temperature and humidity sensor measures room temperature, humidity and light level and sends the data over Zigbee 3.0 or Bluetooth 5.0. It runs on two CR2032 batteries, which last about 2 years according to the manufacturer, depending on the batteries, use and connection strength.

The e-paper display shows readings and the time
The screen shows temperature, humidity, light level and clock together, so you can read them without a phone. The clock synchronises automatically over Bluetooth or Zigbee. The display colours can be inverted: dark digits on a light background or light digits on a dark one. In complete darkness, power save mode stops the screen refreshing.

Connecting to a Zigbee hub and the Shelly app
The sensor works standalone or with home automation platforms supporting BTHome. One press of the control button opens setup mode for 3 minutes; five quick presses then add the sensor to a Zigbee hub and four quick presses start Bluetooth pairing. Monitoring in the Shelly Smart Control app needs at least one permanently powered Shelly Wi-Fi and Bluetooth device (Gen2 or newer) that relays the sensor data to the Shelly cloud. Radio range is up to 10 m indoors and up to 30 m outdoors.

Mounting with magnet, metal plate or tabletop stand
The back of the sensor has a built-in magnet that holds it directly on a metal surface. On a non-metal surface, stick the supplied metal plate in place and attach the sensor to it. On a shelf or desk, the sensor stands on the tabletop stand stuck to its back. The housing measures 65 × 65 × 9 mm; with the stand the depth is 33 mm.

Getting started and replacing the batteries
The batteries are already fitted on delivery; remove the insulating and protective elements before first use. If the display does not blink and update its initial data, replace the batteries. To do so, undo the screw on the back, pull out the battery holder, insert new batteries with the correct polarity and secure the holder with the screw.
In the box
- Temperature and humidity sensor Shelly BLU H&T Display ZB, 1 pc
- 3 V CR2032 battery, 2 pcs (fitted)
- Metal plate with adhesive tape, 1 pc
- Tabletop stand, 1 pc

Reviews
There are no reviews yet.