Description
Door and window sensor with tilt angle and light measurement
The Shelly BLU Door/Window ZB door and window sensor (model SBDW-103C) works on Zigbee 3.0 and Bluetooth 5 LE at the same time and detects a door or window opening and closing with a magnet. Over Bluetooth it works with Shelly Plus, Gen3, Gen4 and Pro series devices, and over Zigbee it joins a Zigbee 3.0 network.

Tilt position and light as automation triggers
The built-in G-sensor measures the door or window tilt angle, so the sensor recognises the tilt-and-turn vent position. The light sensor measures illuminance that can trigger automations. For example, you can switch the heating off when a window is tilted, start ventilation at a set opening angle or turn the lights on after dark. With BTHome support the sensor also fits BTHome-compatible Bluetooth automations.

Two operating modes and encrypted communication
In regular mode the sensor sends the door state, illuminance and battery level right after a change. For tilt-and-turn windows the tilt angle follows 2 seconds later and is checked every 8 seconds. In beacon mode the sensor sends data every 30 seconds; this mode is enabled in Shelly Smart Control settings and uses considerably more battery. In encrypted mode transmitted data is protected.

Pairing and power
Press the button 4 times quickly to enter pairing mode, 5 times for Zigbee pairing, and hold it for 30 seconds for a factory reset. Radio range is up to 10 m indoors and up to 30 m outdoors. According to the manufacturer, the CR2032 battery lasts up to 5 years in regular mode. The sensor works at −20 to 40 °C.
In the box
- Door and window sensor Shelly BLU Door/Window ZB, 1 pc
- Magnet, 1 pc
- CR2032 battery, 1 pc

Reviews
There are no reviews yet.