Description
Fully modular power supply with braided cables
Deepcool PN1000M power supply complies with the ATX 3.1 and PCIe 5.1 standards and delivers twice its rated power within 0.1 ms, covering the momentary power spikes of the graphics card. 80 PLUS Gold means at least 90% efficiency at 50% load. The power supply measures 150 × 150 × 86 mm.
Graphics card power and cables
All cables connect through the modular panel of the power supply, so you only install in the case the cables your system needs. The 16-pin graphics card cable has 16 AWG copper wires and is rated for 105 °C. In addition, the graphics card has three 6+2-pin PCIe connectors and the processor has two 4+4-pin connectors.
Cooling and protections
A 135 mm fluid dynamic bearing (FDB) fan changes its rotation speed according to the cooling need. During a short mains interruption, the power supply keeps the output voltage at 80% load for at least 16 ms. The power supply has over-power, over-voltage, short-circuit, over-temperature, over-current and under-voltage protection, surge and inrush current protection (SIP), and no-load operation protection (NLO). According to the manufacturer, the power supply operates at altitudes up to 5000 m above sea level.
Installation
Fasten the power supply with the screws included, following the case manual. Connect the motherboard, processor, SATA and peripheral power cables, and the graphics card power cables if needed. If the graphics card has a 16-pin power socket, preferably connect it with the 16-pin cable of the power supply. Finally, connect the power cord and set the power supply switch to the “I” position.
Included in the package
- Deepcool PN1000M power supply
- 24-pin (20+4) motherboard power cable
- 2 processor power cables with 4+4-pin connector
- 3 graphics card power cables with 6+2-pin PCIe connector
- 16-pin (12+4) graphics card power cable
- 2 SATA and peripheral power cables
- 4 mounting screws
- cable ties
- power cord





Reviews
There are no reviews yet.