Description
Carbon monoxide detector with Link+ radio network and display
The interconnectable carbon monoxide detector X-Sense CO03D-W detects carbon monoxide with a Figaro electrochemical sensor. The LCD display shows the CO level in ppm (parts per million).


Link+ network connects detectors across the home
The Link+ radio connection links up to 24 X-Sense Link+ devices in one network. When one detector senses carbon monoxide, all detectors in the network sound, so the alarm is heard on another floor too.



Alarm timing follows the CO concentration
The higher the concentration, the faster the alarm triggers: after 120 minutes at 30 ppm, within 3 minutes at 300 ppm. During an alarm a sound signal of at least 85 dB at 1 m sounds, four short beeps repeat every 5.8 seconds and the red LED flashes. The three-colour LED also shows power (green) and fault (yellow). The TEST/HUSH button checks the detector and silences a false alarm for up to 9 minutes.

Powered by three AA batteries
The detector runs on three replaceable AA alkaline batteries of 1.5 V and is designed for 10 years of use. A low battery is signalled by a yellow LED and a beep every 60 seconds. At the end of its life the detector beeps three times every 60 seconds.

In the box
- Carbon monoxide detector X-Sense CO03D-W, 1 pc
- Mounting bracket, 1 pc
- Screw, 2 pcs
- Wall plug, 2 pcs
- AA alkaline battery 1.5 V, 3 pcs
- User manual

Reviews
There are no reviews yet.