Description
TTL camera flash in a small silver body for Nikon cameras
Made for Nikon cameras, the TTL camera flash Godox iFlash iT20 N measures 41.5 × 41 × 32 mm and fits the camera’s hot shoe. At full power the recycle time is about 1.5 seconds, so consecutive frames follow with a short gap.


i-TTL or manually set power
The M button switches between TTL and manual mode. In TTL mode you adjust flash exposure compensation by ±3 stops in 1/3-stop steps; in M mode you set power from 1/32 to 1/1, also in 1/3-stop steps. Sync speed is 1/200 s.

Magnetic diffuser and colour filters
The diffuser and colour filters attach magnetically to the front of the flash. CTO and CTB filters make the light warmer or cooler to match the light on location.

Use
Switch off the camera and flash before mounting. Slide the flash straight into the camera’s hot shoe until it locks firmly in place; to remove it, hold the release button and pull the flash out. A long press of the power button switches the flash on or off, a short press fires a test flash. After 40 consecutive full-power flashes, let the flash cool for about 10 minutes.
Compatibility
Nikon i-TTL automation works with the Z6III, Z8, Z5, Z50II, Z50, Zfc, Z6II, Z30, Z6, Z7II and Z9.
In the box
- Camera flash Godox iFlash iT20 N, 1 pc
- USB-C charging cable, 1 pc
- storage bag, 1 pc
- magnetic diffuser, 1 pc
- magnetic colour filter, 2 pcs
- instruction manual





Reviews
There are no reviews yet.