Description
TTL camera flash that sets its output automatically on a Nikon camera
The TTL camera flash Godox V1N is an on-camera flash for Nikon cameras that supports Nikon i-TTL automatic flash. In i-TTL mode the camera measures the light reflected from the subject with a pre-flash and sets the flash output itself. In manual mode the output can be set in 81 steps from 1/1 to 1/256.

Round head and modelling light
The round-head reflector spreads light evenly from the centre to the frame edges, and the colour temperature of each flash stays within 5600 ± 200 K. A 2 W LED modelling light with 10 brightness levels shows the effect of the light before the shot. For bounced light the head turns 0–330° horizontally and −7° to 120° vertically. The flash zoom covers focal lengths of 28–105 mm.

Lithium battery and fast recycling
Power comes from a removable VB26 lithium-ion battery of 2600 mAh, good for about 480 full-power flashes. The recycle time at full power is up to 1.5 s. The supplied charger fills the battery in about 3.5 hours.

TTL flash in the wireless Godox X system
The built-in Godox X 2.4 GHz radio system lets the flash work as a master or a slave at up to 100 m. As a master, the V1N controls up to five slave groups (A–E) on 32 radio channels, and a radio ID of 01–99 separates your system from other flashes on the same channel. The S1 and S2 optical slave modes fire the flash from the light of another flash.
Sync and flash modes
High-speed sync (HSS) lets you use the flash at every shutter speed of the camera. Flash exposure compensation covers ±3 stops in one-third-stop steps, and rear-curtain sync can be selected. In RPT mode the flash fires repeatedly during one exposure at up to 100 Hz to capture several images of a moving subject.

Use
To mount it on the camera, turn the locking wheel left, slide the flash into the camera’s hot shoe and turn the wheel right to lock. To fit the battery, press the battery release button and slide the battery in until the latch clicks. You choose TTL, M or RPT mode with the MODE button, and the firmware can be updated through the USB-C port. As a master the flash goes to standby after about 90 seconds of idling, as a slave after 60 minutes.

In the box
- Camera flash Godox V1N, 1 pc
- VB26 lithium-ion battery, 1 pc
- USB charging base, 1 pc
- USB cable, 1 pc
- charger, 1 pc
- flash stand, 1 pc
- protective pouch, 1 pc
- user manual




Reviews
There are no reviews yet.