Description
Macro flash with two flash heads for close-ups of insects, plants and jewellery
The TTL macro flash Godox MF-T76N is made for Nikon cameras: its controller fits the camera’s hot shoe and two flash heads sit in front of the lens. It is intended for close-up photography of insects, plants, jewellery and teeth.

Two flash heads with separate output and modelling lamps
To set the direction of the light, each head can be moved on the mounting ring and tilted 0–150°. In M mode the output of each head is set separately from 1/1 to 1/256 in 1/3 steps. In TTL mode the A:B ratio can be set from 8:1 to 1:8 and flash exposure compensation from −3.0 to +3.0. For focusing and previewing the light direction, each head has a modelling lamp with 10 brightness levels.


TTL, high-speed sync and the Godox X radio system
In TTL mode the flash fires a pre-flash and sets its output from the camera’s metering. With high-speed sync (HSS) the flash can be used at short shutter speeds, for example in bright light or with a wide aperture. With the built-in Godox X 2.4 GHz radio system the MF-T76N works as a transmitter for other Godox flashes or as their receiver at up to 100 m. As a transmitter it controls groups M, A, B and C; as a receiver it can be set to group A, B or C.

Lithium battery and USB-C charging
With its removable 7.2 V / 2980 mAh lithium battery the flash gives, according to the manufacturer, about 550 full-power flashes per charge and recycles in about 1.2 seconds. The battery charges through the controller’s USB-C port at 5 V / 2 A, and a green indicator shows when it is charged.

Fitting to the camera and lens
For mounting in front of the lens the kit includes eight lens adapter rings of 49, 52, 55, 58, 62, 67, 72 and 77 mm.
- Slide the battery into the battery compartment until it locks.
- Turn the hot shoe locking ring anticlockwise, slide the controller into the camera’s hot shoe and lock the ring by turning it clockwise.
- Fit an adapter ring of the right diameter to the front of the lens.
- Push the flash heads onto the mounting ring until they lock, then attach the mounting ring to the adapter ring.
- The diffusers attach to the flash heads with a short and a long bayonet tab.


Cleaning and care
Clean the flash with a dry soft cloth. Before storing, let the unit cool down completely and keep it in the supplied storage bag in a dry place. For longer storage, charge the battery to about 50%, top it up at least every 6 months and keep it at 0–40 °C. To update the firmware, connect the flash to a computer with the supplied USB-C cable and use the Godox G3 software.
In the box
- Macro flash Godox MF-T76N, 1 pc
- Lithium battery 7.2 V / 2980 mAh, 1 pc
- Charger, 1 pc
- USB-C to USB-A cable, 1 pc
- Diffuser, 2 pcs
- Mounting ring, 1 pc
- Lens adapter ring set AR-R Kit 49–77 mm, 1 pc
- Storage bag, 1 pc
- Instruction manual, 1 pc





Reviews
There are no reviews yet.