Description
Sink cabinet waste separation system BLANCO SELECT II with four buckets
The sink cabinet waste separation system BLANCO SELECT II 60/4 is fixed to the side walls and the front of the base cabinet, so the buckets come out with the front when you open the cabinet. Next to the two 15-litre buckets, two 6-litre buckets sit in one row, so waste can be sorted into four kinds. The total bucket volume is 42 litres, and one 6-litre bucket has a lid. A system cover sits above the buckets. The system is made of plastic and aluminium, and its large, smooth surfaces are easy to clean. The buckets lift upwards out of the frame.
Installation in the sink cabinet
For the runners, the base cabinet needs an inner depth of 450 mm and side walls 16 or 19 mm thick. According to the drawing, the inner width of a 60 cm base cabinet is 562 mm with 19 mm walls and 568 mm with 16 mm walls. The installation height is 361 mm and the installation depth 400 mm. The cabinet front must have no hinges or holes and be at least 16 mm thick. Take the handle position into account when planning.
Mounting plates and runners are fixed to the side walls, and a frame to the inside of the front, which clicks onto the runners. The mounting plate is chosen by wall thickness: one fits 19 mm walls, the other 16 or 18 mm walls. The fixing screws go in without pre-drilling. After installation, the front height, tilt and lateral position can be adjusted with a TX20 screwdriver. Installation requires a TX20 and a flat-head screwdriver.
In the box
- Waste separation system BLANCO SELECT II 60/4, 1 pc
- Pull-out system for connection to the front
- System cover
- 2 buckets, 15 l
- 2 buckets, 6 l
- Lid for the 6-litre bucket
- Runners, mounting plates and fixing screws
Required separately
For a base cabinet with 18 mm side walls, separately ordered spacer plates are needed to fix the runners.




Reviews
There are no reviews yet.