Description
Sink cabinet waste separation system with two buckets and a cover
The sink cabinet waste separation system BLANCO SELECT II 45/2 is fixed to the cabinet front, so the buckets come out of the cabinet together with the front. The two buckets of equal size sit side by side, so waste can be sorted into two types. The pull-out system is self-closing.
The system is made of plastic and aluminium. The buckets and the cover have large smooth surfaces that are easy to wipe clean.
Installation in the sink cabinet
The front must be without hinges or drill holes, and the handle position should be considered at the planning stage. For the pull-out runners the cabinet needs an inner width of 450 mm and side walls 16 or 19 mm thick. Plan the cabinet’s inner size together with the installation height of the system and the installation depth of the sink.
The side panels are fixed to the cabinet walls without pre-drilling. After installation the front can be adjusted in height, sideways and in tilt with a TX 20 screwdriver.
In the box
- Waste separation system BLANCO SELECT II 45/2, 1 pc
- pull-out system for front connection
- system cover
- buckets 2 × 16 l
- side panels, pull-out runners and fixing screws
Needed separately
If the cabinet side walls are 18 mm thick, fixing the runners requires BLANCO spacer plates, sold separately.





Reviews
There are no reviews yet.