Description
Sink cabinet waste separation system with two equal buckets
The sink cabinet waste separation system BLANCO SELECT II 50/2 is a pull-out bin that comes out of the cabinet with the front. The two buckets hold 38 l in total, so you can sort waste into two buckets. The system is matched in size to the sink and tap, so the whole sink cabinet space is used.
The runners are self-closing and the system is made of plastic and aluminium. The buckets and the cover have large, smooth surfaces that are easy to clean.
Installation in the sink cabinet
The runners are screwed to the cabinet side walls, which must be 16 or 19 mm thick. The runners need a cabinet inside dimension of 450 mm.
The front must have no hinges or drilled holes, and the handle position is planned together with the system. In a cabinet with frame doors the system fits when the door frame is at least 40 mm wide.
Plan the installation height of the system, the installation depth of the sink and the resulting minimum inside size of the cabinet together. After installation the front position can be adjusted in height and sideways with a TX 20 screwdriver.
In the box
- Sink cabinet waste separation system BLANCO SELECT II 50/2, 1 pc
- Pull-out frame for fixing the front
- System cover
- 2 buckets, 19 l
Needed separately
If the cabinet side walls are 18 mm thick, BLANCO spacer plates are needed to fit the runners. With a waste sorter in the sink cabinet BLANCO recommends a flat trap.





Reviews
There are no reviews yet.