Description
X-Sense XC01-M Link+ Pro carbon monoxide sensor protects your home from CO danger with a connected network and precise measurement
X-Sense XC01-M Link+ Pro carbon monoxide sensor helps reduce the risk of carbon monoxide poisoning in living spaces, garages and other rooms with heating. The device detects the CO level in the air using an electrochemical sensor and shows the values on a clear LCD screen. Thanks to the Link+ Pro network, up to 24 alarms of the same series can communicate with each other, so that in the event of danger all devices on the network are activated and the warning quickly reaches the whole household.
Main features
- Electrochemical accuracy – reliable CO detection helps you react in time and reduces false alarms.
- Real-time LCD screen – shows the current CO concentration in PPM units and allows a quick assessment of the situation.
- Memory function – stores the highest measured level, so you can see whether and when dangerous values have occurred.
- Up to 24 devices on the network – if one detects danger, all alarms on the Link+ Pro network are triggered, which improves coverage in larger homes.
- App-supported testing – run a remote test and receive notifications, including low battery, without a ladder or manually pressing the button.
- Loud 85 dB alarm – the warning can be heard in another room too, which increases the likelihood of it being noticed.
- Up to 10 years of service life – the sensor is designed for long-term use, and the device signals end of life and low battery.
- EN 50291-1:2018 compliance – reliability meeting standards for domestic use and European market requirements.
X-Sense XC01-M Link+ Pro CO sensor
The device is intended for domestic use and provides a firm layer of protection against CO leaks. The precise electrochemical sensor detects carbon monoxide early, and the LCD screen helps you assess the situation immediately.
Precise measurement and highest-level memory
The LCD screen shows the real-time CO concentration, and the memory function stores the highest recorded value. This makes it possible to check the situation even after an event and to make informed decisions about ventilation or maintenance.
Network of up to 24 connected devices
The XC01-M can be linked into a network of up to 24 Link+ Pro devices. When danger is detected, all alarms on the network are activated, which increases audibility and a sense of security across several floors or rooms.
Testing and management from the app
The mobile app lets you run a remote test and receive notifications, for example about low battery or events. It is a convenient and safe solution, because you do not have to climb a ladder for manual testing.
Powerful 85 dB alarm
When the CO level exceeds the safe limit, a loud 85 dB sound signal is triggered. The sound level can also be heard in adjoining rooms, which helps you react faster and ventilate the rooms or leave them safely.
Long service life and replaceable batteries
The device has a service life of up to 10 years. A replaceable CR123A or CR2/3A cell is used as power. A low battery is shown on the screen and in the app, to avoid unexpected interruptions and keep the device in working order.
Compatibility, accessories and maintenance
The XC01-M operates on an 868 MHz radio frequency and is compatible only with X-Sense Link+ series devices. App testing and notifications work in the Link+ Pro system according to the settings and may require a central unit. Up to 24 devices can be linked in the network, which suits larger homes.
For maintenance, we recommend doing a monthly test from the app or the button, keeping the sensor free of dust with a dry cloth, and replacing the battery when a low charge message appears. The device has a mute duration of about 9 minutes, which helps calm the situation in case of a false alarm. The product’s service life is up to 10 years, after which the sensor should be replaced.
Installation and usage recommendations
Install the sensor near bedrooms and living areas where combustion appliances are located or where people spend longer periods. We recommend mounting it on the ceiling or on the wall in the upper zone at least 30 cm from the ceiling and away from corners, and avoiding installation directly near a stove, bathroom, ventilation opening or very humid places. The operating temperature is 4.4 to 37.8 °C, and the recommended relative humidity is 10 to 85 percent, non-condensing.
Fix it with the screws and wall plugs included. Connect the device to the Link+ Pro network according to the manufacturer’s manual, and test the system both from the button and from the app. In case of an alarm, ventilate the room, leave safely, and avoid switching on appliances until the situation is clear.
Included in the package
- CO sensor with pre-installed battery × 1
- Screws × 2
- Wall plugs × 2
- User manual × 1
A safe choice for your home
The X-Sense XC01-M Link+ Pro combines precise CO detection, a warning signal spread over the network and convenient app monitoring. As a result, the warning reaches everyone faster and you can act in time. The long working life and replaceable battery keep running costs low, while compliance with EN 50291-1:2018 adds confidence in everyday use.



Reviews
There are no reviews yet.