Description
NAS with four drive bays in a desktop case
The four-bay NAS QNAP TS-433-4G takes 3.5-inch SATA hard drives and 2.5-inch SATA hard drives and SSDs over a SATA 6 Gbit/s interface. Drives can be swapped while it runs, and the lockable drive bays hold the drives in place.
A NAS makes its drives available to the whole network
A NAS is a disk device that connects to a home or office network and shares its drives with every computer, phone and TV on that network. The TS-433-4G does this through its rear 2.5 Gbit/s and 1 Gbit/s RJ-45 ports. A drive enclosure connects to one computer over USB; a NAS serves the whole network.
Processor and memory
It runs a quad-core 64-bit ARM Cortex-A55 processor at 2.0 GHz with a hardware encryption engine. The 4 GB of RAM is on the mainboard, and the operating system sits in 4 GB of flash memory that keeps two copies of the system.
QTS file services and backup
The QNAP QTS operating system supports RAID 1, 5, 6 and 10 arrays, JBOD and a hot spare that takes over from a failed drive automatically. Snapshots record the state of folders at a point in time, so files can be restored to an earlier state. QTS also backs up to the cloud, provides iSCSI LUNs and shares files with Windows, macOS and Linux computers and through an FTP server.
Connections and power
The front panel has a USB 3.2 Gen 1 port and a USB Copy button; there are also two USB 2.0 ports and a Kensington lock slot. Power comes from a 90 W adapter; consumption is 22.54 W in typical operation and 8.45 W with the drives in sleep mode, and one 120 mm fan cools it.
In the box
- QNAP TS-433-4G NAS
- Power adapter (90 W)
- Power cord
- Network cable (RJ-45)
- Screws (28)






Reviews
There are no reviews yet.