Description
Wi-Fi router with network-wide VPN and ad blocking
The GL.iNet Flint GL-AX1800 Wi-Fi router is a dual-band Wi-Fi 6 router with speeds of up to 600 Mbit/s on the 2.4 GHz band and up to 1200 Mbit/s on the 5 GHz band. According to the manufacturer up to 120 devices can join its network, so it also suits an office where computers, phones and tablets share one network.

OFDMA and MU-MIMO reduce latency on a busy network
OFDMA lets the router send data to several devices in one transmission, and MU-MIMO processes the data streams of several devices at once, so traffic does not build up in a single queue. BSS Coloring measures channel load and picks a less congested channel, reducing interference from neighbouring networks. The router supports WPA2-PSK and WPA3-SAE encryption and IPv6 addresses.

VPN client and VPN server for the whole home network
OpenVPN and WireGuard come pre-installed and work with more than 30 VPN services, with OpenVPN speeds of up to 500 Mbit/s. The VPN encrypts all network traffic, including that of guest devices and devices without a VPN app. As a server, Flint routes the traffic of remote devices through the home network via a VPN tunnel, and policy routing lets you choose which traffic goes through the VPN.

AdGuard Home blocks ads across the network
AdGuard Home blocks ads and trackers at router level, so protection covers every connected device without installing software on them. Cloudflare DNS over TLS encrypts DNS queries and responses.

Ports, hardware and OpenWrt
The router has one WAN port and four LAN ports at 10/100/1000 Mbit/s, a USB 3.0 Type-A port, a Sync button and four external antennas covering both the 2.4 and 5 GHz bands. Inside are a quad-core IPQ6000 processor at 1.2 GHz, a 1.5 GHz NPU, 512 MB of DDR3L memory and 128 MB of NAND flash. In the OpenWrt operating system you can install extra packages and build your own network configurations.


Mobile internet and several internet connections
Flint works with the GL-M2 development board, a 5G modem with a SIM card slot, and can also take its internet connection from a tethered phone. Multi-WAN support lets you use several internet connections at once: failover switches traffic to the backup connection and load balancing spreads traffic across the connections.

Use and set-up
The router connects to the internet via DHCP, static IP or PPPoE and can be set up as a router, access point, wired or wireless bridge, or repeater. In the settings you can hide the SSID, change the channel, channel width and transmit power, and create a separate guest network. The router can be managed via the web interface, cloud management or SSH. Pressing the reset button for 3–8 seconds restores the network settings, and pressing it for at least 8 seconds restores the factory settings.
In the box
- Wi-Fi router GL.iNet Flint GL-AX1800, 1 pc
- Power adapter 12 V / 1.5 A, 1 pc
- Ethernet cable, 1 pc
- User manual




Reviews
There are no reviews yet.