Description
Auto-ranging multimeter with colour display and battery
The FNIRSI DMT-99 multimeter recognises the measured quantity itself and selects a suitable range. Results appear on a 2.4-inch TFT colour display with 10,000 counts, and the HOLD/REL button freezes the reading or measures the difference from a reference value. True RMS measurement gives the true effective value even with distorted waveforms.


Recording and monitor modes
Besides general mode there are two further modes: recording mode stores the measurement curve and the highest and lowest values in real time, and monitor mode sounds an alert when the reading rises above or falls below a set threshold. The DIY Boot Interface lets you customise the screen layout and measuring modes.


Voltage, current, resistance, capacitance and temperature
DC voltage is measured up to 999.9 V with ±(0.5% + 3) accuracy and AC voltage up to 750.0 V with ±(1% + 3). DC current reaches 9.999 A with ±(1.2% + 3) and AC current also 9.999 A with ±(1.5% + 3). Resistance is measured up to 99.99 MΩ, capacitance from 9.999 nF to 99.99 mF and frequency up to 9.999 MHz, with diode test and audible continuity test. The temperature range is −55 to 1300 °C with ±(2.5% + 5) accuracy.


Live wire detection and non-contact voltage detection
The LIVE function shows with a single probe which wire is live and which is neutral. Non-contact voltage detection (NCV) finds AC voltage in a cable or socket without contact and shows the field strength on screen in four levels with an audible signal.


Battery, fuses and housing
The built-in 1500 mAh lithium battery gives up to 10 hours of operation and charges via the USB-C port; the meter switches itself off when unused. The current inputs are protected by 10 A fuses rated 750 V AC and 1000 V DC. The back of the ABS housing has a folding stand, a belt clip and a hanging hook.






Reviews
There are no reviews yet.