Description
Oscilloscope, multimeter and generator in one handheld unit
The FNIRSI DST-201 handheld oscilloscope combines a True RMS multimeter, an oscilloscope and a DDS signal generator. The multimeter reads up to 19,999 counts.

Oscilloscope for watching signal shape
Oscilloscope bandwidth is 1 MHz with a 5 MSa/s sample rate. The trigger level is adjustable and the trigger modes are Auto, Normal and Single. Infinite Afterglow keeps brief disturbances, spikes and dips on screen. Waveform Hold freezes the waveform on screen for later analysis.

DDS signal generator for testing circuits
The signal generator outputs 13 waveforms, including sine, square and sawtooth, at 0–10 kHz, with 0.1–3.0 V amplitude and 0–100% duty cycle. With the test signal you can test amplifiers and tune filters and simulate PWM.

True RMS multimeter for voltage and current
The multimeter measures DC voltage up to 1000 V, AC voltage up to 750 V and AC and DC current up to 9.999 A. It also measures resistance, capacitance, frequency and temperature and tests diodes and continuity. The Live/Wire function quickly finds the live conductor. The meter selects the range itself and has overload protection.

Data logging and graph
Curve mode and data logging record how a value changes over time and show it as a graph, so momentary voltage drops stand out. Logged data can be analysed or exported later.


Display, battery and housing
The 2.8-inch colour TFT display has day and night modes. The built-in 3000 mAh battery charges over USB-C and auto power-off can be set to 15, 30 or 60 minutes. A silicone cover protects the reinforced housing.



In the box
- Handheld oscilloscope FNIRSI DST-201, 1 pc
- P6100 oscilloscope probe
- Test leads
- Probe with crocodile clips
- USB cable
- User manual


Reviews
There are no reviews yet.