Description
Heat gun with display for electronics work and SMD soldering
The FNIRSI SAG-55 heat gun with display runs at 550 W, with the temperature adjustable from 100-450 °C and the air flow up to 80 l/min. It is designed for electronics work and SMD component servicing; SMD components are parts soldered onto the surface of a circuit board.


PID control keeps the temperature steady
Digital PID control monitors the temperature in real time and corrects it continuously, so the set temperature stays steady without sudden spikes. Built-in sensors monitor the tool and heating switches off automatically if a fault occurs.


Air flow in 20 steps and cold air mode
The air flow of the brushless fan is adjustable in 20 linear steps to match the air jet to a small SMD part or a larger component. One button press switches on the cold air mode, which cools components quickly after soldering.


Colour display and three saved profiles
The 1.54-inch colour LCD on the handle shows the temperature, air flow step, operating mode and selected preset at once. Three temperature and air flow profiles can be saved, and you switch between them with one press.

Heater fits 850 series nozzles
The heater is 80 mm long with a 21.6 mm diameter and fits standard 850 series nozzles, which can be changed quickly. The housing is metal and heat-resistant silicone. Sleep mode switches on automatically via a magnetic position sensor, and standby consumption is below 0.7 W.
In the box
- Heat gun FNIRSI SAG-55, 1 pc
- Power supply
- Power cord
- Set of 6 mm nozzles
- Stand
- User manual



Reviews
There are no reviews yet.