Description
Sink cabinet waste separation system with three buckets for a cabinet drawer
The sink cabinet waste separation system BLANCO FLEXON II Low 80/3 is installed inside the drawer of a base cabinet, so the buckets slide out with the drawer. Seen from above, the 30-litre bucket sits in the middle, the 19-litre bucket on the left and the 16-litre bucket on the right, so each waste type gets its own bucket. The buckets hang from a frame that keeps the system stable. The system is made of plastic and sheet steel.
Installation in the sink cabinet
The sorter goes into a base cabinet with a pull-out drawer. Inside the drawer it needs an installation height of 325 mm above the drawer bottom and an installation depth of 400 mm. The top of the frame sits at most 250 mm above the drawer bottom. BLANCO’s drawing gives an inner width of 762 or 768 mm for the 80 cm cabinet. Cabinets with frame and panel doors with frames from 90 mm are also suitable.
The frame is fitted without marking or pre-drilling. According to the installation guide, the frame and its bracket click together, are screwed to the drawer front and bottom, and the buckets are hung in the frame. Plan the minimum cabinet size together with the installation height of the sorter, the height of the drawer bottom and the installation depth of the sink with its waste kit.
Cleaning
The large smooth surfaces of the frame and buckets are easy to wipe clean. For daily cleaning, use a microfibre cloth moistened with water.
In the box
- Sink cabinet waste separation system BLANCO FLEXON II Low 80/3, 1 pc
- Frame for drawer installation
- 30 l bucket, 1 pc
- 19 l bucket, 1 pc
- 16 l bucket, 1 pc





Reviews
There are no reviews yet.