Description
Undermount stainless steel sink BLANCO SOLIS 400-U
The undermount stainless steel sink BLANCO SOLIS 400-U is fixed from below into the worktop cut-out, so the rim sits under the worktop. The surface has a brushed finish; the outer size is 440 × 440 mm and the height 194 mm.
Installing under the worktop
The sink suits a dense, continuous worktop such as natural stone, glass or composite; wood and wood-based boards are not suitable. The cut-out is 400 × 400 mm with a tolerance of +2/−1 mm and a 42 mm corner radius. For the fixings, holes 5 mm in diameter and 13 mm deep are drilled into the underside of the worktop.
The tap is fitted into the worktop: the hole is 35 mm in diameter and sits 60 mm from the cut-out edge. Before fitting, the bonding edge is cleaned with isopropanol and the rim is sealed with silicone. After sealing, wait 24 hours before using the sink. The drain outlet sits 285 mm below the top of the worktop.
Bowl, drain and overflow
The SOLIS 400-U bowl has BLANCO’s InFino drain system: a 3½-inch InFino basket strainer and covered overflow. The overflow drains water before the bowl fills to the rim, and the C-overflow opening in the bowl wall has a rectangular cover. The basket strainer is opened and closed by hand. The waste kit’s space-saving pipe runs the drain to the back wall of the cabinet, leaving room under the sink; BLANCO recommends this drain together with a pull-out waste sorter.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. With oxygen, the chromium forms a thin, invisible protective layer that renews itself. The first fine scratches on a new sink are therefore normal, and many become less visible within a few days as the layer renews.
The brushed surface keeps its tone under a hot pot and in long sunlight. Small reddish spots on the surface are rust carried over from other rusty objects or the water pipes, and they wipe off.
Stainless sink care
For daily cleaning, put a little washing-up liquid on the soft side of a sponge and wipe along the brushing direction. Circular movements can permanently change the brushed surface. Then rinse the sink and dry it with a microfibre cloth. To remove limescale, dilute vinegar essence with water 1:10 or use a descaler.
Once a month, clean the sink more thoroughly with a cleaner suitable for brushed stainless steel, also applied along the brushing direction. To clean the basket strainer, put a level teaspoon of powdered dishwasher detergent on the closed strainer, pour about 250 ml of boiling water over it, let it work, brush it clean and rinse. Keep abrasive cleaners, hypochlorite bleach, chlorine or hydrochloric acid cleaners, silver cleaning baths, scratchy sponges and steel wool away from the sink.
In the box
- Kitchen sink BLANCO SOLIS 400-U, 1 pc
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
To connect the sink to the drain pipe you need one 1½″ trap. Kitchen sink trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter in the cabinet, the flat kitchen sink trap BLANCO 137287 with a Ø50 mm outlet and two appliance connections fits instead. The kitchen tap is also bought separately.






Reviews
There are no reviews yet.