Description
Kitchen mixer tap with two-mode pull-out spray BLANCO CULINA-S II
Kitchen mixer tap with pull-out spray BLANCO CULINA-S II is a single-lever tap with the lever on the right side of the body. The high arch and flexible metal hose give the spray free range of movement above the sink. The colour is PVD steel. A high-pressure (HD) tap suits homes where cold and hot water pipes come out of the kitchen wall.
Spout, spray and flow rate
The tap is 568 mm high overall and the spout reach is 220 mm. The flow rate at 3 bar is 8.8 l/min. The metal spray head delivers a clear jet or a powerful spray. The spray hose is metal-sheathed.
The lever’s basic position gives cold water; turn the lever towards hot for warm water. With its non-return valve the tap is protected against backflow to EN 1717.
Installing the sink mixer and water pressure
The tap fits a 35 mm hole in the sink or worktop and is secured from below with the BLANCOLock fixing, mounting surface up to 51 mm thick. The flexible connection hoses are 950 mm long with a ⅜″ nut. When fitting the tap into a stainless steel sink, use the stabilising plate to support the mounting.
The tap works at mains pressure up to 10 bar and hot water up to 70 °C. An open boiler installed under the sink needs a low-pressure (ND) tap with three hoses. Only a low-pressure tap can replace a low-pressure tap, because the number of hoses differs.
Flush the supply pipes before connecting the hoses. The hoses are tightened onto the angle valves with a 19 mm spanner. Before first use, remove the aerator from the spray head with the aerator key, run the water for at least 20 seconds, check the joints for leaks and refit the aerator.
Finish and sink colour
The brass body has a PVD finish that BLANCO calls UltraResist stainless steel. According to BLANCO, PVD steel matches stainless steel sinks, especially those with a satin polish.
Tap care
After use, dry the tap with a microfibre cloth. To remove limescale, spray a descaler onto the surface, leave it for a moment, wipe with a damp cloth and dry. Use the soft side of a sponge and keep chlorine cleaners and the scouring side of a sponge away from the tap.
If the jet starts to spray unevenly, remove the aerator and soak it overnight in vinegar water or citric acid. With old water pipes, BLANCO recommends fitting a dirt filter between the angle valve and the connection hose. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO CULINA-S II, 1 pc
- Flexible connection hoses, 950 mm, with ⅜″ nut
- Stabilising plate for fitting the tap into a stainless steel sink
Needed separately
To connect the tap to the water supply you need hot and cold angle valves under the sink to which the ⅜″ hose nuts connect.




Reviews
There are no reviews yet.