Description
Sink accessory BLANCO SELECT AutoMove for opening the waste sorter drawer
The electric opening mechanism BLANCO SELECT AutoMove uses a Blum SERVO-DRIVE unit that gently pushes the waste sorter drawer open at a touch. Lean protection keeps the drawer closed when someone rests against the front. The mechanism measures 555 × 40 mm.
Fit and cabinet width
The mechanism’s rail is cut to the cabinet width. BLANCO recommends a sink waste set with a space-saving pipe together with AutoMove. BLANCO does not recommend the mechanism for a cabinet with an all-round sealing lip.
Installing in the sink cabinet
Remove the front, mark the fixing points with the template and screw the left and right brackets to the cabinet sides. The drive is fixed to the centre of the rail and fitted with its cover, then the rail goes between the brackets and the power supply is plugged into a socket. Four holes 8 mm wide and deep are drilled into the corners of the back of the front, the buffers are inserted and the front clicks back into place. You need a pencil, a drill, a screwdriver and a saw.
In the box
- Opening mechanism BLANCO SELECT AutoMove, 1 pc
- Blum SERVO-DRIVE unit with mounting plate and cover
- Rail
- Power supply with cable
- 2 brackets, left and right, and 4 screws
- 4 buffers
- Marking template
- Blum SERVO-DRIVE installation instructions
Needed separately
A power socket by the cabinet is needed to connect the mechanism’s power supply.





Reviews
There are no reviews yet.