Description
Heat press for phone cases that prints onto the curved edges too
The HTVRONT H17 heat press for phone cases uses vacuum to press the sublimation film evenly against the whole case, so the print covers the centre, edges and curved sections. The case fixture fits cases for both Android phones and iPhones.


Two separately adjustable heating plates
The press has upper and lower heating plates with separate temperatures, and the preheat and transfer times are set separately as well. Each press of a button changes the temperature by 5 °C and the time by 5 seconds. The press remembers the settings for next time and switches off if it is not used for 15 minutes after reaching the set temperature.
Cases, badges, coasters and keychains
Besides TPU and PC cases, you can decorate sublimation-coated badges and coasters, ceramic plates, keychains, slate coasters and sublimation pens. Several flat items can be pressed at once with at least 1 cm between them.

Designing with IdeaStudio software
The free IdeaStudio software holds over 60 phone case templates and places the design on the template of the chosen model. The design is printed with a sublimation printer onto A4 sublimation film.


Use
After setting the temperature and time, place the fixture in the heating chamber and preheat it with the lid closed for at least 5 minutes. Stick the silicone pad inside the case, press the case onto the fixture, lay the printed film on top matte side down and close the lid within 10 seconds. When the temperature is reached, the Start button starts the vacuum and heat transfer. At the end, open the lid wearing heat-resistant gloves and peel the film off the case while hot.

Cleaning and storage
Before cleaning, unplug the power cord and let the press cool down completely. Wipe the press with a soft, dry cloth without detergents, and remove sublimation ink residue from the flat base with alcohol.
In the box
- Heat press HTVRONT H17, 1 pc
- Phone case fixture set, 1 pc
- Badge fixture set, 1 pc
- A4 sublimation film, 5 sheets
- Sublimation badge 58 mm, 3 pcs
- Heat-resistant gloves, 1 pair
- Tweezers, 1 pc
- Heat-resistant tape, 1 roll
- User manual



Reviews
There are no reviews yet.