Description
SFP module for a long-distance gigabit link over one fibre
The Lanberg SFP1-BIDI-SU-1-20-A BiDi SFP module provides a 1 Gbit/s Ethernet link from a switch SFP slot over single-mode fibre up to 20 km away. The fibre connects to the module’s SC/UPC port.
BiDi modules work as an A and B pair
BiDi technology transmits and receives in the same fibre on two different wavelengths, so the link needs one fibre instead of two. The other end of the link takes the complementary B version SFP1-BIDI-SU-1-20-B, whose transmit and receive wavelengths are swapped.
Diagnostics and hot swapping
Transmitter power is −9 to −3 dBm and receiver sensitivity −22 dBm. DDM (digital diagnostic monitoring) passes the module’s operating values to the switch, and you can insert or remove the module without switching the switch off.
Installation
Wear an ESD wrist strap, remove the dust cover from the switch port and slide the module straight into the SFP slot until the latch clicks into place. Then remove the dust caps from the module and the cable and push the SC connector in until it clicks. To remove, disconnect the cable, refit the caps at once, pull the metal bail down and slide the module out.
Cleaning and storage
Clean the connector end face only with a dry fibre cleaner, and store the module dry with its dust cap when not in use.
In the box
- SFP module Lanberg SFP1-BIDI-SU-1-20-A, 1 pc
- Dust cap, 1 pc


Reviews
There are no reviews yet.