Description
Tyre pressure gauge that measures, inflates and deflates
The digital Etenwolf T500 tyre pressure gauge combines a gauge, an inflator gun, a hose and a deflation valve, so one tool checks and corrects the pressure. With the tips and ball needle you can also inflate sports balls and balloons.

Calibrated gauge with backlit display
Each unit is hand-calibrated to ANSI B40.7 Grade 2A, with an accuracy of ±1 PSI. The LCD shows the pressure at 0.1 PSI resolution; the UNITS button selects PSI, bar, kPa or kg/cm², and the LIGHT button lights the display so you can read it in low light.

How to use
To measure, remove the valve cap, check the recommended pressure in the vehicle manual or on the driver’s door sticker, switch on with the ON button and screw the chuck clockwise onto the valve. To inflate, connect the gauge to the compressor with a 1/4-inch NPT quick coupler and press the thumb trigger. Release air from an over-inflated tyre with the bleed valve button. Air flow affects the reading while inflating or deflating; you get an accurate reading once the air flow stops.

Power and build
The gauge works from −10 to 60 °C, so you can check tyre pressure in winter and in summer. The body is metal and the chuck screws onto a Schrader valve.

Power comes from two replaceable AAA batteries, which are included.

In the box
- Etenwolf T500 tyre pressure gauge, 1 pc
- Balloon adapter
- Ball needle
- Presta valve adapter
- Quick coupler
- Valve core removal tool
- Valve caps, 1 set
- Schrader valve core
- Sealing tape
- AAA batteries, 2 pcs
- Storage bag


Reviews
There are no reviews yet.