Description
Tyre inflator with two hoses for SUVs, pickups and inflatables
The Etenwolf S7 tyre inflator with power bank reaches up to 11 bar (160 PSI), with a 38,400 mAh (142 Wh) battery and an air flow of 52 l/min. According to the manufacturer it inflates a 30-inch SUV tyre in about 30 seconds and, on one charge, up to 33 tyres of size 245/70 R17 from 30 to 35 PSI.

High-pressure and high-volume modes
With the high-pressure hose you inflate tyres and balls in six modes: car (8–50 PSI), pickup (10–85 PSI), motorhome (20–130 PSI), bicycle (10–145 PSI), ball (3–16 PSI) and manual up to 11 bar. The high-volume hose inflates and deflates air mattresses, pools, inflatable pillows and other large items. With the high-pressure hose connected, the display shows the item’s current pressure, so the pump also works as a pressure gauge.


Target pressure by rotary knob and automatic stop
The target pressure is set with the rotary knob around the display, and the UNIT button switches between bar, PSI and kPa. When the item reaches the set pressure, the pump switches off by itself, and the last setting is kept for next time. The upper number on the display shows the target and the lower the actual pressure; the sensor is accurate to ±1 PSI.

Inflating a tyre with the high-pressure hose
Take the high-pressure hose from its channel, screw the nozzle clockwise onto the valve and switch the pump on with the START/PAUSE button. Choose the mode with the MODE button, set the target with the knob and press START/PAUSE again to start. In high-volume mode you stop inflation yourself with the START/PAUSE button. The high-pressure tapered nozzle, ball needle and Presta valve adapter sit in the storage panel on the back.
LED work light and 45 W power bank
The LED work light in the handle has four modes: 300 lm, 1000 lm, slow strobe and SOS. With the pump switched on, its USB-C port charges a phone, tablet, laptop, drone or camera at up to 45 W, and the pump also has a USB-A output.

Charging and storage
The battery charges through the USB-C port with the supplied 45 W PD charger, and a full charge takes 4–5 hours. Charge the battery fully before first use. Use the pump in a dry, clean place, store it at −20 °C to 60 °C and charge the battery at least once every three months.

In the box
- Tyre inflator Etenwolf S7, 1 pc
- High-pressure hose, 1 pc
- High-volume hose, 1 pc
- Air chuck, 1 pc
- High-pressure tapered nozzle, 1 pc
- High-volume tapered nozzle, 1 pc
- Ball needle, 1 pc
- Presta valve adapter, 1 pc
- 45 W PD charger, 1 pc
- USB-C to USB-C cable, 1 pc
- Carry bag, 1 pc
- User manual, 1 pc


Reviews
There are no reviews yet.