Description
Tyre inflator for cars, SUVs and bicycles
According to the manufacturer, the Etenwolf S5 cordless tyre inflator from the Zephyr series raises an SUV tyre (235/55 R20) from 30 to 35 psi in under a minute. On one full charge the pump can do this for up to 30 SUV tyres.

Six modes and automatic stop
The MODE button selects car, pickup, motorcycle, bicycle, ball or manual mode, and the UNIT button switches between psi, kPa and bar. The + and − buttons set the target pressure, and the display shows target pressure, actual pressure and a progress bar. The pump stops at the target pressure and remembers the last pressure and unit.
| Mode | Pressure range | Default |
|---|---|---|
| Car | 8–50 psi | 35 psi |
| Pickup | 10–85 psi | 35 psi |
| Motorcycle | 18–55 psi | 30 psi |
| Bicycle | 10–145 psi | 22 psi |
| Ball | 3–16 psi | 8.5 psi |
| Manual | up to 11 bar (160 PSI) | 30 psi |

Hose and valve adapters
The high-pressure hose is 0.9 m long. The Presta valve adapter, inflation needle and tapered nozzle are stored on the back panel, so the nozzle for bicycles, balls and inflatables always travels with the pump.
Battery, charging and power bank
The battery charges through the USB-C port with the included 30 W USB PD charger. On a full battery the pump runs continuously for about 25 minutes at 20–50 psi and 25 °C. As a power bank it supplies up to 30 W from USB-C and 5 V 2 A from USB-A to charge a phone or tablet.


LED light and cooling
The LED work light on the front has four modes including SOS: bright, extra bright, slow strobe and SOS. Active cooling keeps the components cooler during longer use.

Use
- Switch the pump on by holding the START/PAUSE button for 2 seconds.
- Screw the hose connector clockwise onto the valve and select a mode with the MODE button.
- Set the required target pressure with + and − and press START/PAUSE again to inflate.
Cleaning and care
Use the pump in a dry, clean place and do not wash it with water. In longer storage, charge the battery every three months and keep the pump at –10 °C to 60 °C.
In the box
- Tyre inflator Etenwolf S5, 1 pc
- Air chuck, 1 pc
- Presta valve adapter, 1 pc
- Inflation needle, 1 pc
- Tapered nozzle, 1 pc
- 30 W USB PD charger, 1 pc
- USB-C cable, 1 pc
- User manual, 1 pc


Reviews
There are no reviews yet.