Description
Ecovacs D-CC03-2020 blue washable mop cloth for DEEBOT OZMO U2/U2 Pro, 3 pcs
The Ecovacs D-CC03-2020 washable mop cloth is an original accessory for the DEEBOT OZMO U2 and U2 Pro robot vacuum, designed for everyday wet cleaning of hard floors. The set includes three blue microfibre half-moon cloths that can be washed and reused many times. This reduces the cost of consumables and helps keep floors hygienically clean without working by hand with a mop.
Product overview
This Ecovacs U2 washable mop cloth attaches to the robot’s mop base plate and works with the OZMO water tank, distributing water evenly across the surface of the cloth. The microfibre collects fine dust, dried stains and footprints, while the robot’s suction takes care of loose dirt. The washable design allows the same cloth to be used dozens of times, so the product suits both everyday maintenance cleaning and periodic wet wiping of hard floors.
Main features
- Original Ecovacs accessory for the DEEBOT OZMO U2 and U2 Pro robot vacuum.
- Half-moon blue microfibre cloth provides a large cleaning surface and good contact with the floor.
- Washable and reusable: easy to clean and can be used for several cleaning cycles.
- Set of 3 mop cloths, so you can swap a dirty cloth for a clean one straight away.
- Suitable for hard floors (laminate, parquet, vinyl, ceramic tiles, etc.).
- Helps the OZMO wet cleaning system of the robot work more effectively and reduces the need for manual cleaning.
- Light and thin: does not affect the robot’s movement or height, and suits cleaning under low furniture bases.
Technical data
- Manufacturer: Ecovacs Robotics
- Product code: D-CC03-2020
- Product type: Washable Mopping Cloth (washable mop cloth)
- Compatibility: DEEBOT OZMO U2, DEEBOT OZMO U2 Pro
- Colour: blue
- Material: microfibre fabric (floor-friendly, good dirt retention)
- Quantity in package: 3 mop cloths
- Net weight: approx. 0.039 kg (contents)
- Gross weight: approx. 0.059 kg (including packaging)
- Fitting: attaches to the robot’s mop base plate with hook-and-loop strips or clips (same system as the original cloth).
Fit and compatibility
This mop cloth is specially designed to fit the shape and dimensions of the mop base plate of the DEEBOT OZMO U2 and U2 Pro models. Thanks to the precise fit, the cloth stays firmly in place even when the robot crosses door thresholds or carpet edges. For other Ecovacs models (e.g. T8, N8, T9, etc.), the manufacturer offers separate mop cloths, so it is important to make sure that your robot belongs to the U2 series.
Benefits of use and energy efficiency
The mop cloth itself does not consume electricity, but it helps make the robot’s cleaning cycle more efficient: dirt is removed more effectively in one pass, so fewer cleaning rounds are needed and the robot’s battery uses less energy. Because the mop cloth is washable and reusable, there is less need to buy disposable accessories and less waste is produced, which benefits both your wallet and the environment.
Does it suit your room and needs?
The mop cloth itself is thin and light, so it does not change the dimensions of the robot. If the DEEBOT OZMO U2 or U2 Pro already fits comfortably under furniture and over door thresholds, this add-on accessory suits your home without any additional space requirements. The product is intended mainly for hard floors (e.g. laminate, lacquered parquet, stone tiles, vinyl), which you want to keep free of dust and stains on a daily basis.
Set contents and accessories needed
- 3 × Ecovacs D-CC03-2020 blue washable mop cloths.
The set does not include the robot vacuum, water tank or mop base plate; these belong to the basic set of the DEEBOT OZMO U2 or U2 Pro. An existing Ecovacs robot with the OZMO wet cleaning system is needed for use.
Instructions for use
Before use, familiarise yourself with the user manual of your DEEBOT OZMO U2/U2 Pro. The general steps are as follows:
- Switch off the robot or remove it from the charging dock.
- Attach the washable mop cloth to the mop base plate, aligning its edges and hook-and-loop strips so that the cloth stays taut.
- Fill the robot’s water tank according to the manufacturer’s instructions (usually clean water).
- Fit the mop base plate with the cloth to the robot.
- Set a suitable cleaning mode and water level in the app or on the robot’s panel.
- Before wet cleaning, if necessary let the robot run a dry vacuuming round to remove sand and larger dirt.
Maintenance and cleaning
To keep the Ecovacs U2 washable mop cloth cleaning effectively, it is recommended to maintain it as follows:
- After each wet cleaning, remove the cloth from the robot and rinse it clean under running water.
- For heavier dirt you can use a mild detergent, or wash the cloth at a low temperature in a washing machine on a gentle programme.
- Avoid chlorine bleach and harsh detergents, which can damage the microfibre.
- Dry the cloth fully in air before the next use; do not leave it damp on the robot for long periods.
- Replace the mop cloth with a new one if it is visibly worn, fluffy or the cleaning result has deteriorated significantly.
Reliability, durability and value for money
The original Ecovacs mop cloth ensures a secure fit and even water saturation, which in turn improves cleaning results and reduces the extra load on the robot. The microfibre withstands repeated washing, and the three-cloth set lets you use them in rotation: one in the wash, one in use, one spare. This makes the solution cost-effective and, in the long run, cheaper than disposable mop pads.
If you own a DEEBOT OZMO U2 or U2 Pro and are looking for a practical way to wet clean your floors regularly, the D-CC03-2020 washable mop cloth is a simple, reliable and more environmentally friendly choice for everyday use.




Reviews
There are no reviews yet.